Electric actuators have become the mainstream of the industrial market
现如今，电动执行器已经成为了工业品市场的主流，这是为什么呢?中英合资企业天蝶阀门带大家来分析一下电动执行器打动市场的几个原因吧。
Nowadays, electric actuators have become the mainstream of the market. Why is this?Let sino-British joint venture Tandy Valve take you through a couple of reasons why electric actuators are hitting the market.
（IQC罗托克电动执行器）
首先，在运作效率及节省能源消耗方面，自动控制阀的运用是*的一环，传统产业界常用的手动阀、气动阀，在安装成本及效率上均不及电动阀、电动执行器、电动执行机构。
First,in terms of operating efficiency and saving energy consumption, the use of automatic control valves is an indispensable link. Manual valves and pneumatic valves commonly used in traditional industries are inferior to electric valves in terms of installation cost and efficiency, Electric Actuator, Electric Actuator.
（IQTC罗托克电动蝶阀）
业内有关人士表示，阀类在工业流程上，大多用来控制各种流体的行进及流量，如水、油、化学液体等，所依据的参数有温度、压力及流量等。而工厂常用的控制阀有减压阀、气动式定温阀、电磁阀定温系统、比例式控制阀定温系统、温度控制阀等几种类型。在选用各类自动阀时，应考虑热机的种类、要求的精度、控制阀的品质、压降、流量及其构造、故障率、厂家信用和售后服务等因素，才能达到经济实用的目的。
According to industry sources, valves are used in industrial processes to control the flow and flow of various fluids, such as water, oil, and chemical liquids, based on parameters such as temperature, pressure, and flow. The control valves commonly used in factories include several types such as pressure reducing valves, pneumatic constant temperature valves, solenoid valve constant temperature systems, proportional control valve constant temperature systems, and temperature control valves. When selecting various types of automatic valves, factors such as the type of heat engine, the required precision, the quality of the control valve, pressure drop, flow rate and its structure, failure rate, manufacturer credit, and after-sales service shall be taken into account in order to achieve economical and practical purposes.
（IQC罗托克电动调节阀）
就产品本身而言，因电动阀具备装配容易、故障率低以及符合业界自动化需求的优点，是业者较划算的选择。因为使用一般传统气动阀，免不了要有配管、电磁阀及压缩机等才能匹配，而电动阀是以马达驱动，安装简易省事，且电动阀安装配合工厂原有的自控线路即可，可节省其他成本支出。此外，以马达驱动方式开闭较平顺，无瞬间冲力过大的缺点，故障率可大幅降低。
As far as the product itself is concerned, it is a more cost-effective choice for operators because of the advantages of easy assembly, low failure rate, and automation requirements in the industry. Because the use of the traditional traditional pneumatic valve, inevitably have to be equipped with piping, solenoid valves and compressors to match, and the electric valve is driven by a motor, easy to install and save, and the electric valve installed with the factory's original automatic control line can save other the costing payment. In addition, the motor drive method is relatively smooth in opening and closing, and there is no short-term impulse overload, and the failure rate can be greatly reduced.
不少人都认为阀门电动执行器贵，使用成本高，其实不然，如果以整体计算，传统阀要加上许多配件及管路安装，价格并未占优势，反而要承担较多的保养费用。
Many people think that electric valves are expensive and the cost of use is high. Actually, it is not true. If we take the overall calculation, traditional valves must be equipped with many fittings and piping installations. The price is not dominant, but we must bear more maintenance costs.
现在的一个趋势就是正不断的在各各领域中应用各种不同的电动执行器。毫无疑问的，这个趋势会发展的越来越广泛，使我国真正进入到一个“工业智造”的时代。
One current trend is the constant application of various electric actuators in various fields.Without doubt,this trend will develop more and more widely, so that China will truly enter an era of "industrial wisdom".
